12 Companies Leading The Way In Window Handles
Upvc Window Handles Replacement
The replacement of your window handles made of upvc is a relatively easy process that requires only a few tools and steps. To ensure a successful replacement, first identify the handle type and then measure the spindle.
There are two types of upvc handles: Cockspur and Espag handles. Espag handles are equipped with seven millimetre square spindles which engages the locking mechanism of the frame.
Espag handles
Espag handles are one of the most popular kinds of window handles available for Upvc windows and some timber frames too. They are designed to be used with espagnolette multipoint locking systems. The handle has a 7mm square shaft which protrudes out from the back. It is then put into the gearbox to create an interlocking system that is multipoint inside the window. They come in a variety sizes for spindles. This is due to the fact that every kind of Install window handle handle is anchored to a multipoint locking system that has an asymmetrical layout.
Standard specifications for espag window handle include a push button that can lock the window into the closed position. They also have keys-locking features and, if necessary, a fire escape non-locking feature. Some of them even comply with Secure by Design standards, which will provide you with extra security. They are usually attached to the sash with two screws spaced 43mm apart.
There are several variations of the espag handle. The most notable is the in-line or cranked model. In-line handles can be turned both left and right. Cranked handles only work when the window is moving in the same direction. clockwise or anti-clockwise). They can be attached to the window in either way, but it is crucial that they point in the same direction the old cockspur handle did.
When you are choosing the replacement window handle, it is crucial to take the time and take measurements of the spindle. The spindle is the metal bar that protrudes from the back of the door handle. Its length can vary between 10mm and 55mm. It is the length that is exposed when the handle is together in its original state. This is the length that you will need to match when purchasing a replacement handle, as the spindle is the one that drives the lock inside the window furniture see also upvc wooden window handles.
Some manufacturers offer magnetic espag handles that eliminate the need to cut spindles into sizes. This can speed up the process of fitting, making it faster and easier to remove and insert an alternative. You should still be sure to measure the spindle in order to make sure that the handle operate smoothly.
Cockspur handles
Cockspur handles are used on older uPVC and aluminium windows and they do not have an internal locking mechanism, but are considered safe due to the handle's nose locks on a wedge-shaped block that is inserted to the frame of the window (this kind of handle should not be confused with timber window handles windows, where there is a catch instead). Cockspur handles are still popular and are available in various styles to fit any type of doors.
They are an easy and cost-effective option, and they can be key-locking to meet the requirements of home insurance. You can also select the handle height to suit your frame. A lockable version, which adds a level of security and has been endorsed by Secured by Design, is also available.
These types of handles are attached to the sash on a tilt-and-turn or casement window using a spindle that runs through the baseplate. The handle is operated by the lever that is located on either side of the handle. the spindle of the handle engages with the striker wedge that is fitted to the frame of the window to secure it. Cockspur handle kits is available in left and right hand versions. There are also a variety of nose heights that fit most frames.
The correct wedge block size is the most important factor in a successful installation. This is simply a small block of plastic designed to look like ramps and you can replace the old handle with one of a slightly larger size to ensure that the handle will close correctly across the gap in the window to prevent drafts. There is a certain standardization of the fixing positions for these handles and they typically have 38mm and 58mm, so you are likely to find the correct replacement without much trouble.
When selecting a handles for cockspurs, you must also consider the spindle's length. This is the distance between the baseplate of the handle and the point where the shaft extends from the sash and into the frame. It is crucial to set this correctly to ensure that the handles work smoothly.
Tilt and Turn Handles
Specially designed for windows that tilt and turn these handles are available in locking, non-locking, or a tilt-safe option. These heavyweight handles have an extremely firm grip, and detents are situated at 90 degrees. They are available in a choice of finishes, including white, black, gold chrome, brushed satin and chrome. They are suitable for Timber or PVCu tilt and turn windows.
These handles can be used to replace the cockspur made of upvc that was used on older windows that don't have a lock. However, be aware that these handles are different to upvc espag handles since they're not locked and operate in a different manner.
They feature an 'turn before tilt' mechanism that allows windows to be opened inwards, and then dropped into a ventilation or hopper style position to let fresh air in. This type handle is also referred to as a DK or dry-keep window handle. It's often used on older double-glazed windows in commercial or residential properties.
There are a lot of things to consider when replacing the tilt and turn window handle. Firstly you need to ensure that the new handle is appropriate for your windows, this includes examining the spindle length. The spindle length is the length of the steel rod that extends from the handle into the locking mechanism. The longer the spindle, the more secure it will be.
Handles are typically fixed to the window frame or base with the screw that is placed above or below it depending on the way the window is designed. You can use a screwdriver to remove these screws and then take the handle off. It is best to open the handle first in order to make it easier to access both screw holes.
Once the handle is removed you should be able see two more screws that must be removed. This will reveal some decorative caps. They can be removed using a flat-head screwdriver before the handles can be removed. Once the handles have been repositioned on your windows, you can replace the cap on the screw.
Measure the spindle's length
The spindle length of a window handle is important because it determines how the handle will open and close. It is important to measure the length of your old handle and compare it to the spindle length of a new one. This will ensure that your new handle fits in the window in the right way and is easy to open and close.
If you're looking to replace your handles or simply improve the appearance of your uPVC window, the handle style will have a significant effect on how the window opens and closes. There are a variety of handles, including inline espagnolette, cranked and key locking. In addition there are tilt and turn handles, which are designed to work with tilt-turn uPVC windows that can be opened both ways.
To replace a window handle, first find the screws that secure it. These are usually located above or below the window handle and can be removed using the screwdriver. Once the screws have been removed, you can then remove the handle from the window frame.
You can then remove the handle from the window frame and replace window handle it with a brand new one. Make sure the new handle is placed the same way as the old one was and that the spindle is properly aligned with the lock mechanism. Once the new handle is in position, you can insert the screws and fix the handle. You can then place the caps on the screws when they're missing.
It is possible to change the handles on your uPVC window in the event that they break. The handle may break as a result of a powerful pressure or the female portion that the spindle goes into could be worn out. This could happen if a person in your home tries to force the handle during the time it is locked.
If you are looking to replace your uPVC handle, you should choose a high-quality one that will last for a long time. This will save you money over the long term. It will also give your house a a more modern and attractive look.