13 Things About Saab 93 Key Fob You May Not Have Known

How to Replace a Saab 9-3 Key

The Saab 9-3 has an impressive amount of appeal for drivers. It has a powerful engine and excellent visibility. It has a very high safety rating.

However, it is important to ensure that you have two keys that are working for your car. If you lose one key, it could be costly to purchase an additional one.

How to Replace the Ignition Key on a Saab 9-3

You'll need to replace the car key in the event that it isn't turning. This guide will explain how to replace the ignition key on a saab spare key 9-3. You'll have to replace the key, buy another reprogrammable device, and then purchase a new casing for your key-fob.

In contrast to older models, the majority of modern saab 9-5 key replacement cars use transponders in the key-fob rather than a physical metal key to unlock and start the vehicle. The problem with this is that the reprogrammable battery inside the key-fob will wear out and lose charge any longer. This is especially relevant if you use the same key for the same lock.

The good news is that the battery can be replaced easily by an experienced locksmith. You can also do it yourself if you have the proper tools and a bit of patience. The first step is to disassemble the key-fob off. Insert an open-ended head into the slot in the middle of your case. You will need to work slowly, as the plastic is extremely thin and easily damaged.

Once the case is open then you can prepare the new key by combining the lower section of the old key and the banana and transponder on the new key. This will ensure that the new key is linked to the CIM correctly, which can make a big difference when replacing the sole key for your saab key fob 9-3.

How to Replace the Ignition Key on a saab car key replacement 900

If you don't have two keys, you'll need to remove the dashboard and steering wheel to gain access to the ignition. Start by disconnecting the negative battery cable. Once the battery is removed, you can remove all the trim pieces as well as dashboard pieces that surround the steering wheel. After the dashboard has been removed, you can insert an screwdriver into the opening behind the ignition switch.

The ignition cylinder is equipped with a key lock that could prevent the vehicle from starting if it doesn't have a key. If the ignition switch on your 900 doesn't work correctly, make sure to check if the key is in the lock or is stuck inside the ignition barrel. It's also a good idea to rotate your keys frequently and keep them clean so that they don't get bent.

Saab cars differ from other vehicles because they do not use traditional metal keys. Instead, the car detects the electronic signals generated by the key fob through a special chip in it.

If you lose only one key fob that is working, your dealer will charge a premium to replace your computer module (also called the CIM). We can reprogram the EEPROM on your current computer to allow it to accept new keys without the need to replace it. This will save you up to 50% of the cost the dealer charges! This is the Saab Key Code KEY PROGRAM. Find out more about it here!

How to Replace the Ignition Key on a saab keys 9-5

The metal part of a traditional Saab key is simple to copy, and not much of an impediment against theft of a vehicle. The electronic portion of the key fob has a chip that recognizes the car when the key is placed in the ignition switch.

Saab has relied on the technology of this anti-theft system for more than a decade. It's not as efficient as a door lock however it makes stealing your car a lot more difficult. This is the reason why every Saab owner should keep a spare key on hand.

Most new Saabs come with two keys from the factory, but you can upgrade them at a dealer through a special handheld computer, called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which have more modern and advanced features that require a separate key-fob, and work through a different process.

If you lose all keys, the dealer will replace your CIM or TWICE modules and charge you a premium for it. We can reprogram your computer's EEPROM to accept new keys without having to replace expensive modules.

How do I replace the ignition Key on the Saab XC90

If your SAAB 9-3 key fob starts having issues turning the barrel of the lock It could be the time to replace it. The procedure is quite simple and you don't even need to visit a dealership. You can complete the process at home using a few simple tools.

The first step is to prepare the new key. Before you begin, ensure that the anti-theft feature is disabled by placing blocks on your rear wheels and activating the handbrake. Put the key into the ignition and then turn the key to the "on" position. This will activate the accessories but will not start the engine. Repeat this process 5 times, and then put the key in the "on" position.

The next step is to get a replacement case for the old key fob. You can get these at any auto parts store, and they're typically very affordable. Based on the model, you could even buy them without electronics.

To open the case to open the case, gently push the screwdriver with a flathead into the slot in the middle. When you've split the case, you will have access to all of the internal electronics. To get rid of the electronics, use a small screwdriver and try prying them out with a gentle force.