15 Terms Everyone In The Upvc Door Handles Industry Should Know

Types of UPVC Door Handles

When your upvc door handle requires replacement, it is essential to choose the correct replacement for your home. Locksmiths can provide and install high-security uPVC handles with extra security features.

The most important measurements are measurement A (known as PZ) and the length of the backplate (measurement F). Check these measurements to ensure your new uPVC handles for upvc windows will fit.

Lever/Lever

A lever is a solid bar that pivots around a central point (known as a the fulcrum). When you apply force to the end of the lever it will tend to rotate the fulcrum in the direction of the force. This motion increases the force applied and allows you to lift or move something that would require more force if you were to apply directly to the load.

The distance between the fulcrum of the lever and the point where you apply force determines the maximum movement. This is referred to as the mechanical advantage. The greater the length of the lever more, the greater the mechanical advantage. You can determine the mechanical advantage by dividing the distance from the fulcrum to the point where you are applying the force by the distance between the fulcrum and the end of the lever.

Levers can also have different effects depending on how the forces are applied. A lever in class 2 for instance, has a tendency of rotating in the opposite direction when the effort force is applied. If you push on the door handle, the forces will produce rotational effects similar to this.

However, levers don't create energy. They multiply the force by converting small amounts of effort applied over a lengthy distance into larger amounts of force that are applied over shorter distances. Levers are used to lift heavy objects and move large amounts of cargo. This is also the principle behind the levers that are found in many everyday tools like crowbars, fishing rods claws for hammers, and even your legs when you sit on the hand brake of your vehicle.

Lever/Pad

Lever pad handles are a type of upvc door handle that have levers on both sides to operate the multipoint lock. These are available in various finishes and designs and can be used on a wide range of materials such as UPVC doors, Aluminium doors & Timber Doors. They are sold in pairs for the inner and outer door with spindles & screws included. They are available in hand- and non-handled versions to meet the needs of different users.

They can be used to replace upvc door handle an existing upvc door. The levers are lifted to open all multipoint locks, and the key is turned to close or unlock the door. They offer some extra security when compared to traditional lever door handles because the locking function can only be gained via the inside using keys unless the door is deadlocked.

They are not as secure as a cylinder bolt but are a reasonable alternative to add security. The only disadvantage is that they don't have the same level of security as a cylinder bolt, and consequently don't block access to outside in the event that the door has been left open.

The majority of lever pad upvc door handles that we have in stock are manufactured by the leading manufacturers in the industry, and will be manufactured with good quality components. They also come with a manufacturer's warranty.

They usually are designed to work with the 92mm lock or a substitute version known as the Paddock Lock. They will have a 92mm cylinder centre on the inside and 62mm on the outside and be equipped with two spindle followers. Some come with the backplate in place, while others are movable to accommodate different fixing centers.

Lever/Snib

Lever latches are the most basic kind of door handles. Pushing down on the lever operates a simple latch mechanism inside to keep the door shut, and can be locked using a key. The levers for privacy are in the same way but with the addition of the Snib (like the doorknob).

A snib button is very useful, especially in homes where it's essential to protect privacy or ensure security. If your spouse is expected to arrive home late from work, you can utilize the snib button to ensure that they won't be able to enter until they're ready to move in. This kind of handle can also be used for bi-fold doors handle in the interior, like those in bedrooms, where you wish to limit access from outside.

Snib buttons may cause problems in some cases, especially when you have locks that are old and doors that are warped. If the snib button was accidentally pressed or by someone who is not familiar with it, your door may be slammed and you locked out. Most of the time, you can be able to get in by knocking the door frame or the letterbox, but this isn't a good idea.

If your uPVC has a snib, we recommend replacing it with a smart lock from the E-LOK 7 Series. These locks can be retrofitted on pull handle kits that double glazing handle turn and are available with cover plates to conceal the holes that are already present, allowing to make it a seamless installation. The E-LOK utilizes a smart app to allow you to open the door using mechanical keys or RFID cards and can be set up with passcodes for secure entry and convenience. The system has been tested to 200k cycles to ensure durability. The handles are made from solid metal and are in compliance with BS EN 1670 Grade 5 for resistance to corrosion.

Lever/Moveable Pad

This is a popular handle design for front doors. It comes with the advantage of keeping the door from being opened from outside without a key, if the lock isn't deadlocked. This is accomplished through the 'pad'-shaped external handle which locks in the gap between the handles and the lock case to stop the latch from being withdrawn or the door being opened.

This type of handle is designed for uPVC doors fitted with multipoint locks that operate with split spindle technology. This type of operation requires that the internal lever handle and external pad handle are both fitted to the same lock case. It is a simple change from the current uPVC handles, but it might also require a change to the lock case or a brand new set of handle furniture to allow this additional function.

These aluminum levers and movable pads door handles are designed to be used on uPVC and feature an easy-to-maintain slide bearing. They also come with fixing lugs, spring cassettes and an unstick slide bearing. The handles have an euro-profile cut out and can be installed on a variety of uPVC or doors made of timber.

Lever moveable pads are offered in a variety of finishes and suit many different multipoint locks. They are designed to work with split spindle multipoint locks which have a 92mm cylinder and require a specific split spindle set that is supplied by the lock maker.

These Hoppe London lever moveable pad handle 77G/3831N/113 is made of cast aluminum with an anodized finish that's scratch-resistant and resistant to corrosion. They can be used with various other Hoppe products like Patio Door handle door handles, french door handles and window handles. They come with an escutcheon for security.

Lever/Moveable Snib

The lever/lever handles are among the most common kinds of upvc door handles. They are available in various designs. It has two moveable inline handles and can be locked using either a key or thumbturn cylinder on the inside. A pad handle can be used as an alternative to lever or lever handles. It is comprised of a fixed or moveable pad which can be used to operate the lock. These Fullex handles have a spring-loaded lever pads with snibs that can be triggered to hold the latch back.

When choosing a replacement upvc handle, you need to consider the screw centres, the back plate length, and the PZ measurement. This will ensure that the handle will work with your existing locking system. You can use our online measuring guide to help you take these measurements, so you're sure that your new upvc handles will be a perfect fit.

We offer free delivery on all orders, or you can pick up your order in store for free. Orders placed before 11 am will be ready for collection the same day.