9 Lessons Your Parents Teach You About Patio Door Lock Repair
Patio Door Lock Repairs
Over time, patio doors experience wear and tear which can cause locks that fail. There are fortunately, a number of simple and effective steps that can help restore your upvc patio door repairs patio door's security.
These easy fixes will make your home safer, whether you realign the lock or clean the locking mechanism.
Clean the Lock
Although patio doors are an excellent way to let the outside in and keep out the elements however, they can also pose security risks if your lock isn't working as it should. As time passes wear and tear hot and cold weather dirt and debris can affect your patio door's lock and cause it to become difficult to open. Fortunately, with a little maintenance you can ensure that your patio door's locks always work properly.
It's important to first clean the patio door lock as well as all moving parts. This will help to remove any grime or coatings that may be preventing your lock from working properly. Begin by wiping the moving parts of your patio door's lock with a damp cloth, then employ a scouring pad or rough damp cloth to scrub any difficult-to-access parts of the door and frame that are ingrained with dirt. Then clean the lock with a dry towel to remove any remaining moisture. Allow it to air-dry before using it.
If your patio door uses pin-tumbler locks You can apply powdered Graphite on the key. You can also use a Teflon oil like WD-40 Multi Use Product. This type of lubricant is easy to apply and doesn't break down with time. If you are unable to find an appropriate lubricant you might use a pencil with an extremely sharp tip. Insert the pencil into the lock and jiggle it around a bit to distribute the graphite.
Tracks for sliding patio door repair service near me patio doors require regular maintenance to ensure that they're free of dirt, dust and other debris. These tracks are especially susceptible to snow, ice, and other debris, which can cause them block or become stuck. This can make it difficult for your patio screen door repair near me door to open and shut.
Clean the track rails and rollers on sliding patio doors by removing any damaged or dirty weather stripping. Clean it, and then replace it. The same is true for rollers on Patio Door Lock Repair doors, which can be cleaned and sprayed with non-stick lubricant that will allow them to move freely.
Lubricate the moving parts
uPVC French Doors, like sliding patios, operate by using 3 to 4 or sometimes, 5 point locking mechanisms. This includes the lock cylinder and handle that is operated with the key. They also require maintenance, including lubrication of the moving parts. This can be done with an oil that is thin but not WD40. It should be done every year, at a minimum.
If the hinges aren't causing the problem, it could be that the door is not aligned. It could be rubbing against or catching the hole of the strike plate in the frame. The solution is to take off the strike plate and then use an abrasive chisel, which will enlarge the mortise that it rests in. This will permit the latch to fit into the hole and also prevent it from rubbing against the frame.
Measure the length of the cylinder using a piece of book or wood that is able to fit into the space above the adjustment screw. The outer dimension is measured from the outside of door to the center cylinder. The inner dimension is measured from the center adjustment screw to the end cylinder.
Check the lock's width
If your patio door latch isn't able to turn, even after oiling and cleaning it's possible that it is not aligned with the strike plate. Make sure that your door is balanced, and that the hinge screws are secure. In many instances, moving the strike plate upwards or downwards will fix the problem.
The most common issue is when the lock's strike is too small for the latch to properly engage. In this instance you'll have to increase the hole with the hammer or chisel and then test the latch to make sure that it contacts the strike plate smoothly without rubbing against or getting caught on the door's frame jamb.
Before buying a replacement lock, first identify the type of mortise lock you have. You can do this by taking a look at the faceplate of the lock and noting if it is round or square. Examine each screw hole in the existing lock and note the size. This will help you find an alternative that is of the same size and is a perfect fit for the hole you have already.
In addition to identifying the current mortise lock, you'll also want to inspect it for any scratches or bends that may require repairing. A bent or damaged latch is more likely break than one that hasn't been used much, so be sure to replace the lock with a new secure and safe version when you spot any indications of damage or wear.
Once you've inspected the lock and identified which type of replacement you need, it's time to start working on the actual repair. Take the old handle and spindle out of your patio door, and then insert the new one. Begin by installing the handle inside by aligning it with the spindle, and then fixing it with the two bolts or screws which hold it. Install the exterior handle after the interior handle. Once you've completed these steps, you can test the new handles to make sure they can be opened and closed easily and that the latch is catching correctly when you strike the plate.
Check the door's Strike
The door latch and strike plate are two parts of the lock that work together to ensure that the latch locks the door. If they are not aligned properly and the latch isn't latching the door shut correctly. This issue is usually easy to solve.
First, inspect the strike plate's holes for receiving to ensure they are clear of obstructions such as dirt or plastic plugs. Then loosen the screws that hold the strike plate in place and allow it to move horizontally, but not removing it from the door frame. Then, adjust the strike plate so that its holes for receiving are aligned with the latch hooks on the door latch. After the strike plate has been adjusted, tighten the screws and test the door to see whether it shuts easily with the new adjustment.
Door strike plates can be difficult to access for homeowners who have sliding patio door glass repair near me doors, however they are essential for locking and unlocking your door. These metal plates are usually located at the top and bottom of the door jamb, which is where they are used to support the door's latch. The door latch is placed on the strike plate, creating the seal when it is closed. If the strike plate is damaged, rusted, or is not properly installed the latch might not properly lock the door.
A misalignment between the latch and strike plate is the most common reason for a patio lock to not close or stay. This can be checked with the "lipstick" test. Rub some lipstick along the edge of the deadbolt, then cover it with masking tape. The lipstick will leave a mark when you close the door. This will indicate exactly where the latch connects to the strike plate. If the mark is too low or high it is possible to adjust the strike plate.
If your patio door locks for sliding aren't working correctly they could be a problem in keeping your home safe from burglars. It is imperative to fix this problem as soon as you can. By following these easy steps, you can fix your patio door's lock and restore its functionality in no time.