The Most Popular In Wall Fireplace Experts Are Doing 3 Things

In Wall Fireplace - How to Choose the Right Height and Depth for Your Fireplace

A fireplace in the wall gives an elegant and polished appearance without the cost of mantles. It is one of the easiest electric fireplaces to set up.

However, there are several things to think about before buying your fireplace in wall. Follow these suggestions to get the most out of your investment.

Height

Although it might seem like something that is easy but determining the height of your new fireplace is among the most crucial decisions you can make. This is because the height of your fireplace will impact everything from how it will fit in a room to how well it is visible. Your fireplace could look strange in the event that it is set too high. It could also take away from its beauty. On the other side, having your fireplace set too low can cause it to be lost in the wall space.

Luckily, electric fireplaces are versatile enough to be positioned at various heights. The majority of people place their fireplaces in a seated position at eye level. This usually requires a height of 40-42 inches from the floor to the bottom of the fireplace. Others mount their fireplaces underneath their TVs, which can be visually appealing.

The exact height of your fireplace will depend on certain factors, such as the size of the room and the length of the wall on which you'd like to place it. The larger a room is and the bigger it is, the larger it can be which could mean that you are able to fit a bigger fireplace in it. The length of a wall is also important because a wall that is longer can accommodate a bigger fireplace suites.

Another crucial aspect to take into consideration is how you plan to make use of your fireplace. If you are planning to use it only for decoration, then a lower height is best. If you want to use it to heat your house, you will need to ensure that the fireplace is strong and tall enough to meet the safety standards.

It is essential to choose the proper height for your fireplace, so that it is in line with your decor and be easy to clean or fill. You can always ask an expert fireplace installer to assist you if you are unsure of the height you should choose. They can suggest the best height for your fireplace according to their experience and the design of your home's layout.

Depth

A fireplace's depth is important to consider if you intend to put it in a recessed position. If you're planning to cut into the wall, ensure that you have enough space to accommodate your fireplace's inner design (the space for the smoke shelf above the firebox and the flue that rises from the roof). Also consider the space you'll have for the surround and whether you would like a mantle.

Many of the latest electric fireplaces have the depth of being almost concealed, creating an almost "built-in" look. The Panorama Bi-Deep series is a fantastic example of this kind of wall-mounted electric fireplace. The model has an 5.8-inch depth that lets the viewer see the flames and ember bed instead of the frame of the fireplace. It also comes with a variety of media options, including natural looking driftwood logs, white pebbles, or clear glass crystals that reflect the flames and add luster to the ember bed.

Gas wall-mounted fireplaces can be found in deep and shallow models. When determining the depth of your fireplace it is important to remember that these units are supplemental heat sources and should be vented properly by an experienced professional. When determining the depth of a gas fireplace it is important to take into consideration the length of the vent pipe and the size of the chimney.

If you decide to go with a surface mount or a recess-mounted installation, it is essential to follow all of the manufacturer's instructions carefully when mounting your fireplace. In most instances, hiring a professional to install your fireplace is highly recommended. It is also best to have an extra person on hand when installing a gas fireplace.

The addition of an in-wall fireplace space to your home is a fantastic way to add value to it and create an atmosphere. It can also help lower your heating costs. It is also a great alternative if you cannot fit a traditional fireplace in your home due to space restrictions or the location of a chimney.

Surface Mount

If you're unable, or prefer not to cut through your wall or build out an area to accommodate an electric fireplace A surface mount can give you a sleek and modern appearance. Certain models, such as the Allusion line of electric fireplaces, can be installed partially recessed into walls without compromising the heat output.

To begin the installation process, determine the location where you would like your fireplace to be located and mark it with a pencil along the wall where the bracket will be installed. Utilize a stud-finder to find the studs and place each bracket in front of at least one stud for stability. If a stud cannot be reached or is not suitable for your fireplace, use drywall anchors to provide support.

Once you've identified the location of the mounting brackets on the wall and then use a power drill to install them and ensure that they are in alignment with the studs. You can use studs or anchors made of plastic to attach each bracket. After the mounting brackets have been installed then lift the fireplace up and hang it from the bracket. Once the fireplace is installed, make sure it is level.

Before you proceed with the installation, plug in your fireplace and make sure that all the features are functioning correctly - turn on the flame and ignite the flames, play around with the heat, ember bed lights and so on. When you're satisfied with your results, it's time to install your floating mantel.

Depending on the model of your fireplace, Electric firesuite you will either need to connect the wire connection to the appliance connector at the lower part of the mantel or if it has slots or hooks connected to the slots on the mounting brackets. After you've completed this process make sure to consult the user manual for instructions on how to remove the glass front panel from the opening and replace it.

After you've removed the front panel of your fireplace and installed it into its opening, follow your guideline to complete the install by replacing the glass front and adjusting the height as needed. If your fireplace is equipped with ember bed media, spread it over the top of the grate to give it a an organic appearance, then secure it with the included screws.

Plug-In

Contrary to traditional wood fireplace-burning fireplaces electric fireplaces don't require vents or chimneys. They're plugged into standard outlets that can provide supplemental heating for rooms that can be that are up 400 square feet in size. You can also alter the atmosphere with different flame and heat settings. Some models feature LED lighting effects that emphasize the embers and fire. Other models include a top grille grate that hides manual controls but easily can be opened to reveal pushbuttons for your preferred setting.

Plug-in electric fireplaces can be mounted directly on walls or installed into the wall for an elegant appearance. These units are typically more straightforward to install than a mantel fireplace. Some units come with a pedestal to permit you to place the fireplace on flat surfaces such as a dresser or buffet. Included are a remote control, mounting hardware and log set. Depending on the model, these electric fireplaces can include heat and flame options that can be turned off for all-year-round comfort.

Some models feature privacy glass that can be adjusted instantly from fully transparent to partially transparent. This makes these models popular for walls that separate common spaces for entertainment, such as living and dining spaces. These models are ideal in bedrooms, where a fireplace is a cost-effective way to warm up a room and maintain privacy.

While plug-in electric fireplaces don't require a hardwire as built-in models, they must be installed on a wall that is at the very least not stud-free and is able to support the weight of the fireplace. Some models come with a kit that includes a pre-wired cord as well as a specially designed bracket to make the installation process simpler. This kit can be used for either the installation of drywall or concrete.

When deciding on a place for your wall-mounted electric fireplace, ensure that it's near an electrical outlet. Depending on the model, plug-in electric fireplaces can be connected to outlets that are connected to the same circuit or a separate circuit for your electric fireplace. It is recommended to use an exclusive circuit to ensure that no other appliances in the home will run at the same voltage and potentially trip your breakers.