This Week s Most Popular Stories About Saab 93 Key Fob

How to Replace a Saab 9-3 Key

The Saab 9-3 is a car that has a large amount of appeal for drivers. It offers good visibility and an impressive performance engine. It also has a top safety rating.

However, it's important to ensure that you have two working keys for your car. If you lose the only key, it could be expensive to replace it with the new one.

How to Replace the Ignition Key in a Saab9-3

You'll have to replace the car key in case it isn't turning. This guide will walk you through the steps to do it on the Saab 9-3. You'll need to replace the key, buy an additional reprogrammable cell and buy a new case for your key-fob.

As opposed to earlier models, modern Saab automobiles use a transponder in the key-fob, instead of a physical metal key to unlock and start the vehicle. The issue with this is that the reprogrammable battery on the key-fob can wear out and won't hold a charge for any longer. This is particularly when you use the same key for the lock you have.

A professional locksmith can replace the battery quickly. If you have the proper tools, and a little patience, you can do it yourself. The first step is to take the key-fob out. This is done by inserting a flathead screwdriver into the slot in the middle of the case. The plastic is thin and can easily be damaged.

Once the case is open and you are able to prepare the new key by combining the lower section of the key that was used previously with the banana and transponder on the new key. This will ensure that the new key is properly connected to your CIM and can make a huge difference when replacing the sole key on your Saab 9-3.

How to Replace the Ignition Key in a saab 900 key 900

If you don't have two keys you'll need to remove the steering wheel and dashboard in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, you are able to remove the dashboard and trim pieces around the steering wheel. Once the dash has been removed, you can place an screwdriver into the opening behind the ignition switch.

The ignition cylinder has key locks that can stop the car from starting if the key isn't in it. If your 900's ignition isn't working, look at the key to see whether it's inside the lock or in the ignition barrel. It's also an excellent idea to rotate your keys frequently and keep them clean to ensure that they don't get bent.

Saab cars are different from other vehicles in that they don't make use of traditional metal keys. Instead, the car detects the electronic signals generated by the key fob through a chip that is specifically designed for it.

If you lose your sole working key fob, the dealer will charge the highest dollar for the replacement of the computer module (known as the CIM). We can reprogram the EEPROM on your existing computer and make it accept new keys, without having to replace it. This can save you more than 50% of the cost the dealer charges! We call it the saab car keys KEY PROGRAM. Find out more about it here!

How do you replace the ignition Key in a Saab9-5

The metal component of a traditional Saab key is easy to copy, and also not much of a barrier against vehicle theft. The real protection is the electronic component of the key-fob, which is equipped with a chip that recognizes your car when it is inserted into the ignition switch.

saab Replacement key programming has relied on the technology of this anti-theft device for more than a decade. It's not as effective as a physical lock on the door however it makes the act of stealing your car harder. That's why every saab key replacement owner should always have an extra key available.

Most new Saabs come with two keys from the factory. However, you can add more at an authorized dealer using a handheld computer known as Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this is the NG 9-3 cars, with more modern, more advanced features that require an ignition key.

The dealer will replace the CIM or TWICE module in these cars if keys have been lost, and cost you top dollar for this. We can however reprogram the EEPROM on your computer and set it up to accept new keys without replacing the expensive modules.

How do I replace the ignition Key on an XC90 Saab

If your SAAB 9-3 key fob begins experiencing issues turning the barrel of the lock it's possible that it's time to replace it. It's a simple process and you don't have to visit a dealer. You can complete the process at home with just a few simple tools.

It is first necessary to prepare the keys for your new car. Before you start, disable the anti-theft system by placing blocks underneath your rear wheels and releasing your handbrake. After that, put the key in the ignition and move it to the on position which activates the accessories, but doesn't start the engine. Repeat this five times, and then put the key on the "on" position.

Then you'll need to buy a new case for your key fob. They can be found at a variety of auto parts stores and are generally inexpensive. Based on the model, you could even get them without any electronic components.

To open the case, gently push the screwdriver with a flathead into the slot in the middle. Once you split the case, you'll have access to all the internal electronic components. Use a flathead screwdriver, which will gently pry open the electronics.